HOME



  The drawings below illustrate the wire frame of the Cape Ann HV as seen in the CAD program. Only a half hull is shown in the lower two drawings to reduce the clutter of the lines. Please note that the drawings are not foreshortened. In other words the lines are a pure 2D projections without a perspective. A perspective allows you to see objects as they appear to a camera or in real life.

An example: If you look down train tracks, they appear to converge to a single point in the distance. In the case of a drawing like this they would appear parallel to each for ever. This makes the objects closer to the viewer appear the same size as distant objects. In real life (due to perspective), the portion of the kayak that is farther from the observer would appear smaller. The dimensions and proportions, however, are correct.
Technical specs | Cape Ann HV description

 

Looking from the rear right side toward the bow






Looking at the "buttocks" (vertical slices along the kayak) of the right side






Looking from the front right toward the bow




Home Kayak Designs Kayak Shop Materials Kayak Gallery About us
Building Manual Plans Sandwich Core Wood Kayak Order E-mail
Epoxy Test Abrasion Cloth Rudder Resources Choosing Kayak Guestbook

If you notice any problems with the site (i.e. error links, missing images) please, let me know. Thanks

Mail:
Vaclav Stejskal
58 Wood Ln.
Acton, MA 01720
           USA
Tel:  781-481-9261

E-mail  

© 1999 - 2024 Copyright Vaclav Stejskal
All rights reserved

Last page update: 9 May 2024